Innovating Safety & Productivity for the Corrosion Control Industry
Alu-Clad Tungsten Carbide Nozzles
RS Blastech's aluminium clad tungsten carbide nozzles offer long life, designed to create a wide blast pattern and increase velocity.
Recommended to increase productivity when blasting larger surfaces.
If you want a lighter, more user friendly and long life nozzle, check out our Endurablast Boron Carbide Blast Nozzle.
Available in many sizes for immediate despatch.
Guaranteed Quote
within 48 Hours
Aluminium jacket
Tungsten Carbide liner
50mm contractor screw thread
High efficiency
Long life
Available in the following sizes:
1/2” Dia x 9” Long
1/4” Dia x 5.5/16” Long
3/8” Dia x 6.11/16” Long
5/16” Dia x 5.3/4” Long
7/16” Dia x 8” Long
Venturi Bore Nozzles create a wide blast pattern and increase abrasive velocity by as much as 100% for a given pressure. Venturi nozzles are the best choice for greater productivity - especially when blasting larger surfaces.
Long venturi nozzles such as the BP200 SiAION yeild about 40% increase in productivity when compared to straight bore nozzles while abrasive consumption can be cut by approximately 40%.
How much wear is too much? A quick test to determine the efficiency of your blast - insert a drill bit of a size that matches the original bore of the nozzle. If there's any slop it's time to replace the nozzle, because nozzle wear means pressure loss, and for every 1psi of pressure lost there is a 1.5% reduction in blasting efficiency - i.e. only 85psi coming out of the nozzle end (rather than 100psi) will mean that you are working at only 77.5% efficiency - far more costly than replacing the nozzle.
| Product Code | Description | Price | |
|---|---|---|---|
| Alu-Clad Tungsten Carbide Nozzles | POA |
